High Chrome Handled Holding Magnet

High Chrome Handled Holding Magnet, higher quality, reasonable price., fast delivery, Can product as customer's reqest.

A pack of 1 - 27mm dia x 6mm thick N42 Neodymium Magnet with a 28mm dia x 30mm tall handle. The SOUTH pole is on the countersunk face and the NORTH pole is on the handled face. These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni).

These magnets will have approximately 3500 Gauss on each face. Each magnet can support a steel weight of up to 3.5kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 2.5kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets are held in place by the Magnetic Face and have a maximum operating temperature of 50 degrees C.
Magnetic Components:

1. Material: Ferrite, ceramic, cast Alnico, NdFeB

2. Magnetic properties: High corrosion resistance, High working temperature, High coercive force and low cost. It is easily formed into various sizes.

3. Paint: In red or blue or as customer request

4. Grades:

Ferrite: Y10T, Y20T, Y25, Y30, Y30BH, Y35

Alnico: LN9, LN10, LNG12, LNG13, LNG37, LNG40, LNG44, LNG52, LNG60, LNGT28, LNG36J, LNGT18, LNGT32, LNG40, LNGT32, LNGT40, LNGT60, LNGT72

NdFeB: N35-N52, 35M-50M, 30H-48H, 30SH-45SH, 30UH-40UH and 28EH-38EH

5. Magnetic Components: Permanent magnet linear motor parts, magnetic chucks, magnetic filters, magnetic lifting, magnetic rotor, magnetic clip, magnetic hook and so on

6. Application: Magnetic component are widely used in toys, crafts, speakers, CD / VCD movements, generation, magnetic separator and so on, involving audio, auto, electronics, medical, aerospace and chemical industry in various fields of daily life.